Reinforced canopy models have reduced sections with a width of 700 mm. Due to the smaller area of ​​the polycarbonate sheet, they are more resistant to snow and wind loads. According to test measurements, they can withstand loads of up to 208 kg. per section. Standard models of canopies have a section width of 1050 mm and are designed for smaller loads, up to 100 kg. per section.

This can happen due to hot cutting of polycarbonate in production, the edges melt and expand slightly. Don't worry, this will not affect the structural strength and assembly. The thickness of the polycarbonate is 6 mm and it is less than the width of the groove of the stiffener bar and the groove of the bracket. You need to lightly press the edges of the polycarbonate with your hands or a hard tool. This is indicated in the instructions.

Yes, CONOS canopies can be securely connected to each other, forming a single tight canopy without cracks or gaps. Do not use any additional adhesives when joining (glue, sealant, etc.)

Yes, you can reduce the section width to suit your needs. You will need to shorten the polycarbonate sheet and aluminum stiffeners.

There is no need to remove the visor for the winter. Sales experience in northern countries shows that the materials of the visor can withstand such sub-zero temperatures.

The visors are made of synthetic materials and aluminum inserts. The brackets are made of high-quality polypropylene, and the canvas is made of cellular polycarbonate. The materials do not release toxins when heated in the sun. They also withstand sudden temperature fluctuations without compromising the integrity of materials and structure.